Maxchaos's latest activity
-
MMaxchaos replied to the thread Husqvarna 576xp - FixerUpper.Updated: the bearing was put with Loctite 638,cured for 2 week now,pocket was pitted and bearing got in with a bit of hammering,later...
-
-
MOk guys,I'm splitting a 560xpg,year 2015 that have a trashed cylinder and piston. When searching for cylinders and bearings,they list 2...
-
-
MMaxchaos replied to the thread Guys if you ran regular carb saws for years, what were your thoughts when finally got a m-tronic or autotune saw????.If It works like dirtbikes I was told that they "wake" themselfes everytime you kick the starter pedal, it's likely the same for...
-
MMaxchaos reacted to ammoaddict's post in the thread Guys if you ran regular carb saws for years, what were your thoughts when finally got a m-tronic or autotune saw???? with
Like.
I totally agree. They should even include a cable with the saw and a code to be able to download the software from their website. -
MMaxchaos replied to the thread Guys if you ran regular carb saws for years, what were your thoughts when finally got a m-tronic or autotune saw????.I have 3 550xp mk1 and 1 560xp mk1,I like them because they scream and don't really need a tube,but I much prefer the screwdriver...
-
MMade this gasket up for my little tractor last night no more leaks now
-
MIt might be worth to try locking the PTO side bearing in with sleeve retainer.
-
MYeah, looking at that picture, its looking really rough.
-
MMaxchaos replied to the thread 576XP bearing depth limiter cracked.Yes,I was thinking of start with the 2 bearings and gasket,if I can lock the bearing and close the crankcase,an aftermarket top end will...
-
MMaxchaos replied to the thread Husqvarna 576xp - FixerUpper.Here in Italy i can only find Hyway kits for that kind of price,I've seen the Dukes kit but don't know how they perform. Hyway seems...
-
MSame thing here....the OEM stuff for both Stihl and Husqvarna are typically $300+. There are other options that might be more...
-
MMaxchaos replied to the thread 576XP bearing depth limiter cracked.Very hard to find here,I think I Will trash It and call It a day or waste some money on trying to somewhat make It work with a trash top...
-
MYeah that’s roasted. Better look for another case half.
-
MHello everyone! I've picked up a used 576XP for what seemed low price. However I found out that It has an aftermarket cylinder and the...
-
-
MIf you have a 576 chassis that cylinder will work.
