Maintenance Chief's latest activity
-
I do have a brass hammer -
Also there is no play up and down with a connecting rod the normal side to side is fine I found a 500i carcass that had been run over...
-
It pulled together just fine but turning it over by hand it would not turn free and I have not yet put the seals I knew something wasn't...
-
I straightened a 7900 one after pressing in a new bearing and then welded the pin as well. Actually done it 3 times now none have...
-
Two V blocks and a dial indicator will show you the truth. I had to check a solo 681 crank after I welded the pin.
-
Actually, its been the hundred thousand 572's that have lost crank bearings that haunt me the most 🤣🤣😂
-
He probably just got done with 35 562’s though, so🤷🏽♂️😂
-
SawAgain sells them for $358.
-
So you can see the listing ok? I wasnt sure it would link... Can't imagine what Stihl charges...
-
Im currently in the process of rebuilding 17 ms500i's, Many of them with broken cases, if i come up with an extra crank i will let you know
-
It went in and turned ,but I could tell one lobe has spun. I am sending it to Shaun to see if he can true it.
-
Definitely twisted crank. It can be trued but only with the proper tooling, i used to take my hot rodded 2100 husky cranks into the...
-
Like I said, speaking from experience. I bent this crank installing a cylinder (short version). It failed the first time the saw was...
-
Bar Gauge Kit Posting these items from some old catalogs, because sometimes we only focus on new / current products offered. I...
-
Maintenance Chief reacted to av8or3's post in the thread FOUND IT 5ft or so of STIHL 19mm handle hose 0000 791 2009 with
Like.
I got the complete roll.
