Maintenance Chief's latest activity
-
I put up my old 240v heater in the garage today. There are more modern ones available, but this one gets things toasty. Used a TV mount 😀 -
So, Ernie...in the process of looking through my handle piles I found 2, not 1...288 Pro-Safty wraps :p However, I do not have any 88...
-
Only husky autotune coil I replaced was an 2018 made 572xp which ran after that. I have no idea if their latest autotune iteration is...
-
Maintenance Chief replied to the thread Fixing hole in tank.You ever been to Ricketts Glen park?
-
Maintenance Chief replied to the thread Old Homelite project 🤔.I've broke lots of critical parts in the middle of a build! Haha don't sweat it. Ever forget to glue a 2" waterline together! Lol I've...
-
Thanks guys , i had to swallow alot of pride to say that but i just ordered a new set . I saw no markings on the old ones . Are there...
-
So you are planning to meet our maker....or Devil in 6 years......?
-
I think most builders on here modify the original muffler.
-
Maintenance Chief replied to the thread Fixing hole in tank.Jbweld is what I've used on a dozen mag tanks, the sealer is a little $$ but the can I bought is probably gonna last me my lifetime...
-
-
That hole is right next to a seam which is probably glued so welding is probably not an option as you'll burn the glue out.
-
I would favor JB Weld, grind or sand (coarse grit) around the hole, JB all around, press in a piece of screen wire and finish with JB...
-
My first thought was to put the screw back in. Lol
-
All of them, I wouldn't have listed them otherwise. @srcarr52 welded countless chainsaws cases and cylinders both saving them from the...
-
@srcarr52 @tree monkey @dall just a few off the top of my head around here besides all the welding shops out there...
-
I've had great sucsses with JBWELD.
