Maintenance Chief's latest activity
-
Mark -
I’ll try that. Today I re-tested p&c while cycling the piston and spraying soapy water all over… nada leaks. I moved on to assembling an...
-
Check to see if the throttle and choke butterfly screws are tight. Also check for slop in the throttle shaft.
-
I pulled the muffler on the 034,, still has machine marks on the slug. I massaged the muller a little. fuel line on order.
-
Maintenance Chief reacted to Duane(Pa)'s post in the thread Post up your ported cylinder Artwork with
Like.
If you get a chainsaw, you can heat your house for free. Read about it on the interweb! -
Maintenance Chief reacted to huskihl's post in the thread Post up your ported cylinder Artwork with Like.
Single digits a few nights and low - mid 20s for highs. Seems like a constant 10 mph wind
-
Maintenance Chief reacted to huskihl's post in the thread Post up your ported cylinder Artwork with Like.
Nope. Just random pics of stuff to get this wagon back in the right lane
-
Maintenance Chief reacted to huskihl's post in the thread Post up your ported cylinder Artwork with Like.
Back on track 572 Not really artwork, it’s just one I did today
-
50 below F So stoking the boiler and staying warm Took care of a big pile of paperwork today
-
Will it have heating elements in the full wrap part of the handle as well as the standard part?
-
Maintenance Chief reacted to Jake Dykstra's post in the thread Wiseco Pistons from CCC Racing with Like.
I'm a little further away the Stump so mine is still in transit. But very hopeful it may make it this week. My project is an old 044...
-
Maintenance Chief reacted to farminkarman's post in the thread Wiseco Pistons from CCC Racing with Like.
I have a 52mm Wiseco piston for the 046/460 that is setup for the 1.2mm Caber. I bought it to use on a hybrid build but didn't end up...
-
You should probably buy it so I don't.
-
“Need” is such a subjective term :roto2nuse:
-
400.00 plus shipping.
