Maintenance Chief's latest activity
-
-
-
Maintenance Chief replied to the thread STIHL The Official Stihl Chainsaws Thread.The impulse ports are in different locations from what I remember? Your carb gasket might be blocking it.
-
Maintenance Chief reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Arrow towards exhaust on meteor piston -
Maintenance Chief reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Piston was in backwards, which sometimes is done if you need clearance for finger ports ect long as it won’t hook the exhaust port or...
-
Maintenance Chief reacted to Sloughfoot's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Yeh, no pins on my one Mac 10-10. It's why you've gotta leave the little divider in the exhaust port.
-
Maintenance Chief reacted to hacskaroly's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Should be towards the intake, here is a pic from the IPL that shows orientation:
-
Maintenance Chief reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
You can purchase knockoff covers in the tall west-coast style as well. They're about $20 instead of $90.
-
Maintenance Chief reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Never seen a locktite thread locker that won’t soften with heat, the old high strength and high/strength high temp both require heat to...
-
Maintenance Chief reacted to oddsaws's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I prefer not to beat the crankcase together, I’ll just take it slow - crankcase halves in the toaster oven and bearings in the freezer...
-
Maintenance Chief reacted to jacktheripper's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I got this back in the mail today
-
Maintenance Chief reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Mike (Glock57) convinced me the stud removal tools were an essential item, I've used them several times and they are great no doubt...
-
Maintenance Chief reacted to Sloughfoot's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I got em. just needed to go from super tight to ridiculous tight on the vise grips. Took channel locks to get them to let go. 3 or...
-
Maintenance Chief reacted to Sloughfoot's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Will loctite release if I heat the studs?
-
Maintenance Chief reacted to FergusonTO35's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
This is what you need right here, I have this set and it works great...