Maintenance Chief's latest activity
-
Maintenance Chief reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
You can purchase knockoff covers in the tall west-coast style as well. They're about $20 instead of $90. -
Maintenance Chief reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Never seen a locktite thread locker that won’t soften with heat, the old high strength and high/strength high temp both require heat to...
-
Maintenance Chief reacted to oddsaws's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I prefer not to beat the crankcase together, I’ll just take it slow - crankcase halves in the toaster oven and bearings in the freezer...
-
Maintenance Chief reacted to jacktheripper's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I got this back in the mail today
-
Maintenance Chief reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Mike (Glock57) convinced me the stud removal tools were an essential item, I've used them several times and they are great no doubt...
-
Maintenance Chief reacted to Sloughfoot's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I got em. just needed to go from super tight to ridiculous tight on the vise grips. Took channel locks to get them to let go. 3 or...
-
Maintenance Chief reacted to Sloughfoot's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Will loctite release if I heat the studs?
-
Maintenance Chief reacted to FergusonTO35's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
This is what you need right here, I have this set and it works great...
-
Maintenance Chief reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I went thru all the connections, re-gapped the coil to .008, and with a hard yank of the cord, the spark is back! Saw fires on one pull...
-
Maintenance Chief reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
I'm still waiting on one in the mail. Fingers crossed it's the same style case. Working on another 462 m-tronic right now, and have...
-
Maintenance Chief reacted to heimannm's post in the thread POULAN The Official Poulan Thread with Like.
I'm not sure exactly which model Poulan this comes from, may be the 361 but the tag on the saw says 4.0 In3. Mark
-
I just put the new decals on my 670 yardsale find
-
The Dayton is ready for the display. Mark
-
Someone put in a Chinese ignition coil / I put in Walbro Japan and it works fine 👍🤠 although the coil is from a smaller and newer...
-
While I'm waiting for the paint to cure on the Clinton 424 project, I decided to give this Dayton 2Z462A (Poulan 306A) a good cleaning...