Maintenance Chief's latest activity
-
Taking the junk out of some mufflers -
Maintenance Chief reacted to hacskaroly's post in the thread MCCULLOCH The official McCulloch thread with
Like.
That would have been neat to attend!! -
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
They started it initially so some of the younger family members could participate but several of the "more mature" attendees have gotten...
-
Maintenance Chief reacted to FergusonTO35's post in the thread MCCULLOCH The official McCulloch thread with Like.
Wow, I've never seen a 40cc and under competition.
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Mark
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Mark
-
Maintenance Chief reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Oregon 68209, alternate McCulloch part numbers are 86942, 86944, and 86947. 86942 includes a 3/8-7T sprocket, 86944 includes a .404-7T...
-
Maintenance Chief reacted to fossil's post in the thread MCCULLOCH The official McCulloch thread with Like.
Oregon power mate 68209
-
Maintenance Chief reacted to JIMG's post in the thread MCCULLOCH The official McCulloch thread with Like.
Just saw Duke's carries archer drum/rim/bearing sets.
-
Maintenance Chief replied to the thread What's on your bench?.I just saved this cs400 from the dumpster. Decent little 40cc saw , I removed the Cat from the muffler and replaced all the fuel...
-
-
Next up will be a cs 6700 type 1e and a cs 670. All the parts came in. Fresh seals, koyo 6202 bearings, rings and all rubber parts...
-
Shoot. I’ve had a hard time finding 194’s. The dukes makes some clones that have worked for me.
-
Do you have any junked carbs sitting around? I’d pull one off of a parts carb and see. Is that a wt194?
-
I think it's on a metal tube that is pressed into the body. You should be able to yank it out and replace it.
-
Dual ported the 394xp muffler today. I also opened the factory outlet wayyyy up Should do good for blowing off chips while milling...
