Maintenance Chief's latest activity
-
Maintenance Chief reacted to fossil's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Oregon power mate 68209 -
Maintenance Chief reacted to JIMG's post in the thread MCCULLOCH The official McCulloch thread with Like.
Just saw Duke's carries archer drum/rim/bearing sets.
-
Maintenance Chief replied to the thread What's on your bench?.I just saved this cs400 from the dumpster. Decent little 40cc saw , I removed the Cat from the muffler and replaced all the fuel...
-
-
Next up will be a cs 6700 type 1e and a cs 670. All the parts came in. Fresh seals, koyo 6202 bearings, rings and all rubber parts...
-
Shoot. I’ve had a hard time finding 194’s. The dukes makes some clones that have worked for me.
-
Do you have any junked carbs sitting around? I’d pull one off of a parts carb and see. Is that a wt194?
-
I think it's on a metal tube that is pressed into the body. You should be able to yank it out and replace it.
-
Dual ported the 394xp muffler today. I also opened the factory outlet wayyyy up Should do good for blowing off chips while milling...
-
Picked these 2 up in separate sales. Im learning the frustrations of mtronic,,, Some engineer needs a beating!!! Will try to get one out...
-
But... which oil is the goodest? :icon_popcorn:
-
2007 husqvarna 353 from fleabay. Listed as having "low compression." I read that as "needs new top end." Always nice to get a bar and...
-
Maintenance Chief reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Short block for half the price of a meteor piston, definitely cheap enough I’ll be kinda curious to see how long it lasts and runs...
-
Maintenance Chief reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Just to keep up, I bought a $20 short block (seller kept discounting to me) and the 170 is ready for action once again. Mark
-
Maintenance Chief reacted to jacktheripper's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Compared some “working weights” of a few saws just now. Tanks full. Stock flat top 066 1/2 wrap with 25” rollomatic es b/c: 22.8lbs...
-
