Maintenance Chief's latest activity
-
Well guess WTF is on the bench again. You guessed it. I ran the 288xp today and made some cuts, but shut it down when I began to hear... -
Maintenance Chief replied to the thread Post Oak - What saws?.My daily driver is a newer GMC with some fixin's, but I have a $300.00 1989 xj 4x4 and a fairly decent 91 Dakota extended cab v8. Every...
-
Here is a thought that’s been bouncing around my head. Curious about peoples opinions on it here. What do y’all think about picking up...
-
Go for it, if it doesnt work out, youre out what, 400? For a 90cc saw... part of the fun of saws is modding them... i got my ms661 for...
-
I think my 461 is 1128, and it and my dolmar 6100 have similar filters. They are the best factory ones I have found...and those who are...
-
“Refined” is the best way to put it. The newer saws are so, but it remains to be determined if they will have legendary status like the...
-
Hard to tell scale here, but that like is about 10’ tall or so. A fair bit of my work this weekend. 7 different trees stacked up in...
-
28” bar in .404 should do the trick. 7 pin rim. My 500 is ported by Moparmyway and badass, but I’m sure a muff modded 500 should pull it...
-
Yeah probably 28". I'm 6' and like 32" but probably overkill. At 32" I'd probably go skip.
-
Like 25" you'll love 28", assuming you're over 5'6" tall. I'm 5' 10" and 24" feels a tad short and 32" is too long. 28" is juuuuuust...
-
Couldn’t agree more. The Duro carbide chains aren’t designed for cutting wood. @Moparmyway experimented with changing the tooth profile...
-
This sounds like a job for .404 chipper chain.
-
I’m to the east a bit. I have no shortage of standing dead timber I can cut and split. This stuff today was beyond where it should be...
-
Why no firewood? Almost everything I cut here in the desert is heck on chains. I recommend Stihl RM, .404 pitch if you can. The 500...
-
Carbide chain sucks to cut wood with. It’s slow going. I’ve been forced to do it, but it is not fun. If you want to do it, the Stihl...
