mainer_in_ak's latest activity
-
mainer_in_ak reacted to cuinrearview's post in the thread HELP! CS-590 base gasket delete with
Like.
I use a q-tip and "paint" both surfaces with a paper thin layer. Set the jug on the piston just over the rings and tilt the whole top... -
mainer_in_ak replied to the thread HELP! CS-590 base gasket delete.There is nothing wrong with the way the clutch side spikes are attached. It's no different than how many husqvarna pro saws are set up...
-
mainer_in_ak replied to the thread HELP! CS-590 base gasket delete.And if at first you don't succeed (first you don't succeed) Then dust yourself off and try again You can dust it off and try again, try...
-
The squish is massive on that model. Even without a base gasket it's probably at least .030".
-
mainer_in_ak replied to the thread HELP! CS-590 base gasket delete.Nope. Just take a flat file like a raker file and take .015 off the flywheel key. Go slow and check with calipers. This is where i...
-
mainer_in_ak replied to the thread HELP! CS-590 base gasket delete.I run a 590 configured exactly how you describe. It's a torque monster. Yep do an ignition advance. On the base gasket delete, you wont...
-
mainer_in_ak replied to the thread $200 logger boot shootout.The georgia 8100 boots are out. I bet the newer model is better: georgia forestry logger. Seems to be an old glue issue. Oh well, new...
-
mainer_in_ak replied to the thread WANTED Echo cs 680 top end.Get lotta echo stuff from McHenry on ebay. Cylinder and piston kit. You won't beat that price:
-
mainer_in_ak replied to the thread 2nd Gen Ram Pickups.I repaired one with very thin remnants fiberglass and epoxy resin. Roughed it up, primed it and shot a few coats of UPOL raptor with my...
-
Some progress today
-
Much better now
-
Taking the junk out of some mufflers
-
mainer_in_ak replied to the thread What's on your bench?.Yes sir. The cs 8000 got the HDA 45 carb and the cs 680 style cartridge filter. Had to open it up the plastic intake so that the hda 45...
-
I just saved this cs400 from the dumpster. Decent little 40cc saw , I removed the Cat from the muffler and replaced all the fuel...
-
mainer_in_ak replied to the thread $200 logger boot shootout.Finally got those thicker honey badger laces on the unlined g8100 Georgia loggers. The discomfort of lace-bite went away. Boots like...