mainer_in_ak's latest activity
-
mainer_in_ak replied to the thread WANTED Echo cs 680 top end.Get lotta echo stuff from McHenry on ebay. Cylinder and piston kit. You won't beat that price: -
mainer_in_ak replied to the thread 2nd Gen Ram Pickups.I repaired one with very thin remnants fiberglass and epoxy resin. Roughed it up, primed it and shot a few coats of UPOL raptor with my...
-
Some progress today
-
Much better now
-
Taking the junk out of some mufflers
-
mainer_in_ak replied to the thread What's on your bench?.Yes sir. The cs 8000 got the HDA 45 carb and the cs 680 style cartridge filter. Had to open it up the plastic intake so that the hda 45...
-
I just saved this cs400 from the dumpster. Decent little 40cc saw , I removed the Cat from the muffler and replaced all the fuel...
-
mainer_in_ak replied to the thread $200 logger boot shootout.Finally got those thicker honey badger laces on the unlined g8100 Georgia loggers. The discomfort of lace-bite went away. Boots like...
-
mainer_in_ak replied to the thread Firewood thread!!! Let's see what you got!!!!.Going on my 10th year of handsplitting firewood. Have never owned a hydraulic splitter. Too slow and boring. Ive no electricity...
-
mainer_in_ak replied to the thread What's on your bench?.Next up will be a cs 6700 type 1e and a cs 670. All the parts came in. Fresh seals, koyo 6202 bearings, rings and all rubber parts...
-
mainer_in_ak replied to the thread What's on your bench?.No sir, was new outta the box. My last 4910 was stock and wasn't a strong saw. Trying to get the silly thing to hang with a cs 520 or cs...
-
Goes something like that every time I work on a saw. That's some strong numbers. Know what it was doing before?
-
mainer_in_ak replied to the thread What's on your bench?.Echo cs 4910 Had 1 hr. epileptic seizure with a burr grinder. Sealed the cylinder down with hylomar blue. Got that hylomar sht in my...
-
So far so good. How does a 25 years old high hour 026 have an original piston that looks this good 🤷♂️ It was an Idaho saw till it...
-
mainer_in_ak replied to the thread .325 chain, LGX, LPX or X-CUT?.Im too new to 23rs pro to compare the two, but the cutters will easily take the same 5/32" file that i use on pmx 3/8 lp ripping chain...
