lehman live edge slab's latest activity
-
lehman live edge slab replied to the thread Bigger setup for CS milling.The smooth finish comes from the shallow angle. I’ve seen rip chains set up 0-15 degrees it’s all what you want, 5-10 degrees is slower... -
lehman live edge slab replied to the thread Stihl MS261 or Wait For MS300.This is very true and the first fix was a new flywheel and coil with a retune. New ones have factory pop up pistons weather that’s good...
-
lehman live edge slab reacted to sawmikaze's post in the thread Stihl MS261 or Wait For MS300 with
Like.
-
lehman live edge slab reacted to sawmikaze's post in the thread Stihl MS261 or Wait For MS300 with Like.
This is gonna come off wrong... There isn't a person that's gonna post in this thread that has anywhere even close to the amount of...
-
lehman live edge slab reacted to sawmikaze's post in the thread Stihl MS261 or Wait For MS300 with Like.
And it still sucks compared to the new 50cc saws, It wouldn't shock me at all if a 550 with a muffler mod had more usable power than a...
-
lehman live edge slab reacted to sawmikaze's post in the thread Stihl MS261 or Wait For MS300 with Like.
The first version of the 201 wasn't a quality or a defect issue it's performance just sucked out of the box, all it took was a timing...
-
lehman live edge slab reacted to 2000ssm6's post in the thread Stihl MS261 or Wait For MS300 with Like.
They can be impressive when done right, you can use a green weenie air filter but nothing can fix the vibration. I sold all of mine...
-
lehman live edge slab replied to the thread Stihl MS261 or Wait For MS300.A 261 is substantially smoother and stock for stock pretty far above an 026. I still have a 026 red lever from 1991 my dad bought for me...
-
lehman live edge slab replied to the thread Chain help!.As Kevin said large dogs act like a wedge and as the saw gets pulled into the wood it actually will apply down force on the bar and...
-
-
I inquired about the dogs because oversized dogs have the effect of making a chain seem overly aggressive. To the point that a...
-
lehman live edge slab replied to the thread Chain help!.Just to let you know that doesn’t do anything if it’s out of parameters it’s out and needs recalibration with the mdg1. They adjust...
-
lehman live edge slab replied to the thread Stihl MS261 or Wait For MS300.Both have had many, 201 had at least 3 updates. Ms 441 got recalled because of bad intake boot materials and they were blowing up but...
-
No advance on the 500, like mentioned. Which dogs are you running?
-
Poor porting can kill torque.
-
lehman live edge slab replied to the thread HELP! 462 won’t rev up.I’d say it’s the coil that’s giving you issues personally, controls fuel map and timing
