lehman live edge slab's latest activity
-
lehman live edge slab reacted to stihl livin's post in the thread PAST Twin cities 2025 gtg with
Like.
No worries Kevin. I know it’s a long haul for you but we always enjoy your presence. -
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.Glad this works for you I’d much rather just clean and rebuild the carb than risk the saw being on the lean side and wrecking something...
-
This is at the core of the OPE family. Too many step outside and ... Scott have a nice and relaxing Thanksgiving weekend and thanks...
-
lehman live edge slab replied to the thread How many degrees timing advance MS 400?.Other than slightly lighter and possibly better ergonomics no reason to trade for new one but maybe just own one of each.
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.Warming it up some and spraying a good penetrant like areokroil or liquid wrench may help loosen it also.
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.It will be flush with bottom of the chamber on the zama that’s on it. Odds are that’s correct anyway and the carb is just plugged, if...
-
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.The carb is more than likely plugged especially if it was ethanol gas, I’ve gotten quite a few next to new saws that people bought for a...
-
lehman live edge slab replied to the thread STIHL The Official Stihl Chainsaws Thread.The carb needs cleaning and rebuild, they do have a special tool for adjusting the jets. I usually pull the limiters on them, to get...
-
How about we just let Scott post his content here in a handy central location. If you axe me, he can and should charge whatever he...
-
lehman live edge slab replied to the thread treemonkey stuff.O scott I’m sure runs his shop same as my uncle did his machine shop next door, while everyone is in it to make money and survive some...
-
it's all just modifying saws. doing the work each model needs to get the best results. if you're only in this for making money then...
-
If that's the case, I will pay Scott what he feels is due! It is no fault of his or mine, I sent a 400$ check with the saw and told him...
-
I have owned it since new, never been touched till I sent it to Scott, has been sitting in the loft of a hot barn in Florida for 30 +...
-
lehman live edge slab replied to the thread treemonkey stuff.Honestly not a fan just because they charge a premium for 50-70% of what guys on here get depending on model of saw. Also now buckin is...
-
Dyno Joe has some good content in his videos.
