lehman live edge slab's latest activity
-
lehman live edge slab reacted to Wilhelm's post in the thread Picking up my new Dodge Ram today with
Like.
I would demand free extended warranty & on road assist, especially on everything that got tampered with. First free weekend I'd put... -
lehman live edge slab reacted to hacskaroly's post in the thread Ms261 with the new light bars with Like.
100%
-
lehman live edge slab replied to the thread Picking up my new Dodge Ram today.I’ve never had luck with any starter or alternator from Napa.
-
lehman live edge slab replied to the thread Ms261 with the new light bars.well on the 2 displayed it isn’t a very big difference for sure but if they are the same mount and pitch bars it is about 5% difference...
-
lehman live edge slab replied to the thread Ms261 with the new light bars.How much difference is there then in same length and pitch on that one?
-
lehman live edge slab replied to the thread Ms261 with the new light bars.They make the light 04 laminated bar in 050 and .063 they are different then the old rollomatic e they replaced and are 10-20% lighter...
-
-
lehman live edge slab reacted to legdelimber's post in the thread HELP! Craftsman Wood Chipper with Like.
I do see a Briggs logo in the casting. I'm gonna guess that Sears wasn't helpful...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.Don’t worry I’m done, I’ll post some pictures of one I’m done and he can post whatever he likes. Was just trying to help like the whole...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.That’s fine and you can comment on it if you like. I have no problem posting photos or taking advice. Even if it’s negative long as it’s...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.See here’s the thin skin again
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.That’s good was just trying to help and the whole reason to post on here is to get feedback both good and bad along with ideas from...
-
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.I’ll be using my lathe and mandrels like a majority of people when I get time to set up stuff. Busy working at my normal job 12-14 a day...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.How are you cutting the base and keeping the bore at 90 to base so your not side loading rod and piston. Might be an optical allusion...
-
lehman live edge slab reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I have ran down to -10f without the shutter and never had icing problems, not many winters anymore that it does not warm up to at least...
-
lehman live edge slab replied to the thread Looking at upgrading and would welcome advice/opinions..I do believe this was one of the 019t/191t downfalls, reed induction with a long small air intake made of black plastic between the rear...
-
