lehman live edge slab's latest activity
-
lehman live edge slab reacted to legdelimber's post in the thread HELP! Craftsman Wood Chipper with
Like.
I do see a Briggs logo in the casting. I'm gonna guess that Sears wasn't helpful... -
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.Don’t worry I’m done, I’ll post some pictures of one I’m done and he can post whatever he likes. Was just trying to help like the whole...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.That’s fine and you can comment on it if you like. I have no problem posting photos or taking advice. Even if it’s negative long as it’s...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.See here’s the thin skin again
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.That’s good was just trying to help and the whole reason to post on here is to get feedback both good and bad along with ideas from...
-
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.I’ll be using my lathe and mandrels like a majority of people when I get time to set up stuff. Busy working at my normal job 12-14 a day...
-
lehman live edge slab replied to the thread Post up your ported cylinder Artwork.How are you cutting the base and keeping the bore at 90 to base so your not side loading rod and piston. Might be an optical allusion...
-
lehman live edge slab reacted to IffykidMn's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I have ran down to -10f without the shutter and never had icing problems, not many winters anymore that it does not warm up to at least...
-
lehman live edge slab replied to the thread Looking at upgrading and would welcome advice/opinions..I do believe this was one of the 019t/191t downfalls, reed induction with a long small air intake made of black plastic between the rear...
-
-
lehman live edge slab replied to the thread Looking at upgrading and would welcome advice/opinions..Used to be around f freezing, made to prevent carb icing but honestly most people I know never change them and I don’t hear of issues in...
-
lehman live edge slab reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I pulled it harder than I should have until I broke the first spring, it took years. Been trying to go easy since then but have been...
-
lehman live edge slab replied to the thread Looking at upgrading and would welcome advice/opinions..I’m sure you can go regular rewind on the rear handle 193/194 but will require the 193-194t flywheel and rewind assembly with regular...
-
lehman live edge slab replied to the thread FOUND IT Ms261.Concrete dust is nasty stuff
-
lehman live edge slab replied to the thread Stumped on Stihl BR450 Blower Stopping.What do you think is made in China on that blower other than the carb? You unfortunately got a lemon the 450 is a very durable machine...
-
lehman live edge slab replied to the thread Looking at upgrading and would welcome advice/opinions..Your 193 must be a rear handle version, I’ve never seen the 193/194t wirh an easy start set up. I’m sure I have a rewind and the...
