legdelimber's latest activity
-
LI don’t file on any of my depth gauge tools. If the tool is soft, the file could damage it. If the tool is hard, it could wear the...
-
Llegdelimber reacted to DillonBuck's post in the thread Muffler Mods and Increased Decibels??? with
Like.
Not really. Any gas powered saw is well into ear damage range. The standard I’ve been taught was, “If you can’t have a conversation at... -
Llegdelimber reacted to bucketofguts's post in the thread Muffler Mods and Increased Decibels??? with
Haha.
MS 201C with WCS muffler sounds like a Hodaka Combat Wombat. Showing my age:eek: -
Llegdelimber reacted to av8or3's post in the thread Looking for ideas on broken stud removal with Like.
I really appreciate everybody’s input. Before asking for advice I thought about locking it in our end mill and using a small (1/4”) new...
-
Llegdelimber reacted to LAWN BOY's post in the thread Random pics (that you took) thread... with Like.
-
Llegdelimber reacted to davidwyby's post in the thread Random pics (that you took) thread... with Like.
-
Llegdelimber reacted to redline4's post in the thread Random pics (that you took) thread... with
Wow.
Ended up with about a half inch of ice on Thursday and then about a quarter inch last night. -
L.
-
LThe links I used might not work for everyone so I have edited the post and attached them now
-
Llegdelimber reacted to Rolf Lehmann's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
These grinders were built from 1966 to 1980 and distributed worldwide. This machine was produced before 1969 (because DOLMAR move from...
-
LCustomer replaced the coil on his Dolmar PS-45 because it didn’t have spark (allegedly). It still didn’t run for some reason. This is...
-
LIt has been said elsewhere that Henry (DIsston) make Carl (Kiekhaefer) mad and got the DO-101 as a result. Some features like the...
-
LDisston DA211. I've had this saw for over 5 years and I decided it was time to get it cleaned up so I can put it in the display...
-
LI finished putting the Orline powered generator back together. Mark
-
LEcho 7310 came in with low compression. It still ran fine but it didn’t idle well after getting warm. Both piston ring locator pins had...