legdelimber's latest activity
-
LTook some of my Missouri-built saws and made a dedicated wall. (Left to right) Top Row : Mono 1-16(77cc), Mono 60-20(77cc), Mono...
-
Llegdelimber replied to the thread Echo Carb Limiters Question.That gets to the only thing that I ever said nice about the splined screws. Easier to keep the tool on one. Just don't get careless and...
-
LIf you’re talking about the red plastic caps, I pull them with a drywall screw, trim the tab off and put them back in. I’ve had a few...
-
LThe needles stay in place just fine with them off, but due to how small the needles are it can be hard to line up a flat screwdriver...
-
LI follow an Echo guru on yt. He puts them back on after defeating them. His reason is easier to get tuning screwdriver alignment with...
-
LThey built Stihl 500 as nice, as an 009........ Yep 009. My 009 had cheap s/t screws in the muffler which failed, stripped out and...
-
LWell gents, got the grinder apart and changed the capacitor and it fired right up. When putting it back together somehow I broke the...
-
Llegdelimber replied to the thread What is it?.Speaking from metal cutting mostly. I'd say the weld was a bit more common to break. But one or two missing or badly damaged teeth could...
-
LThe cylinder and roof are perfectly fine. Other than the plating getting thin beside the port where the loose piece of aluminum was...
-
LAlso inspect the exhaust port roof for any damage.
-
LI’ll measure the gap later this week.
-
Llegdelimber replied to the thread Chain changing tension as it rotates.Are you thinking of flush cutting a couple of dusty stumps to burnish it in? :D
-
LI wouldent worry so mutch. Just run it for a day, then check if it still slacking. Usually the problem Will disapere.
-
LHi all, i'm new here and I stumbled across this thread. I observed this exactly behavior on my 550xpII buyed last year brand new with...
-
Llegdelimber replied to the thread Random pics (that you took) thread....You guys are making me homesick for when there were still a few family owned farms left around this region. ..been a while since I've...
