High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

Recent content by Kevin White

  1. Kevin White

    Stihl 038 Magnum smoking after cutting?

    To deep clean it, pour exactly 432ml of gasoline on top of the cylinder. Spin it around three times and light a match on top. Gets rid of any bad spirits and burnt on sludge. May or may not need new plastics depending on if you care about looks.
  2. Kevin White

    Stihl 038 Magnum smoking after cutting?

    Could be that your saw is running a touch leaner than it wants to. In my experience, I would dial the H screw out to richer about 1/8th of a turn and see if it does it. Your carb diaphragm may have changed slightly from just age and use, but only changed enough to make a slight difference in the...
  3. Kevin White

    A.C. Lamb chainsaws

    Looks like an old renamed Solo
  4. Kevin White

    Straight gassed

    Doesn't sound straight gassed to me. You typically wouldn't be able to tell just by looking at the top of the piston or the outside of the muffler. Take the muffler off to where you can see the piston. I'd it looks scratched anywhere in there, depending on where the scratches are could tell you...
  5. Kevin White

    Are Efco's any good?

    I feel like i remember someone saying they were similar to Olympyk?
  6. Kevin White

    Tested some Stihl battery powered products today

    Yea obviously those tools are meant for a different market, but still, a market... Lots of homeowners only use that equipment once or twice a year, and they suck at maintenance and fresh fuel. Weve all seen it. I have about 30 string trimmers with probably less than 10 hours on the motors and...
  7. Kevin White

    update on the new Makita/Dolmar 81cc saw

    *clicks boot*
  8. Kevin White

    the ugly saw thread

    I see paint peeling lol
  9. Kevin White

    Cold Starts

    When you first start them on choke, and it pops, then you move the lever up to high idle, do you let it run for a min like that to warm up or just blip the throttle. I find it helps to let them run on high idle after the choke before I squeeze the trigger. I would adjust the low end an eight to...
  10. Kevin White

    Cold Starts

    Good advice, Thanks for the info!
  11. Kevin White

    What's on your bench?

    Homelite XL 12. Going behind someone who "fixed it". Obviously has an air leak behind the carb. I hate this bottom bolt. Anyone got a fast way?
  12. Kevin White

    Cold Starts

    Does the 180 even have a low speed adjustment? Don't know he could Richen it if he tried. Could it be something with the gas they are all using? Did you buy all at the same time? Maybe they all need maintenance :nusenuse:
  13. Kevin White

    Hey Mastermind, I need a saw ported.

    I can't tell if that's really big or really small
  14. Kevin White

    Antiques mall finds today @jon1212

    They are especially valuable if the box is still sealed. Kinda like a cum guard.
  15. Kevin White

    Antiques mall finds today @jon1212

    Ill give you $100 for the "action" figure. I know you bought it.
Top