Ketchup's latest activity
-
https://opeforum.com/threads/ms500i-my-way.33065/ -
Injector cleaning usually consists of removing the carbon buildup from the tips. That is a result of the injectors being in the...
-
Ketchup replied to the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube".It’s a ported 94.4cc saw that weighs 16.6lbs. Nothing else comes close to that.
-
Maybe @tree monkey has some pics he can share of the work he’s done to the lower transfers. I know he has quite a few hours of r&d on them
-
Ketchup replied to the thread 500i questions.Report back on #1 if you do it. I’ve been tempted but left it alone. Across several Stihl Models. Because it isn’t continuous to the...
-
Ketchup replied to the thread HELP! 395 milling saw.For milling I put a 1”ID pipe out the starter side of the can tilted away from the operator. It’s loud, but it’s the least exhaust you...
-
Ketchup reacted to Sloughfoot's post in the thread Forester double bevel square files. quality? with
Like.
Don't think I got through touching up a 2nd chain before the one I have got noticeably duller. -
Ketchup replied to the thread Forester double bevel square files. quality?.Foresters don’t last long.
-
Ketchup reacted to Sloughfoot's post in the thread Forester double bevel square files. quality? with Like.
You'd think if a good round file could be had for a couple of bucks then a good double bevel could be had for ten. Doesn't make sense.
-
Ketchup reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
prototype 2 (pho with a 572 clutch cover, half wrap handle) weighs - 16.6lbs topped off with gas/oil
-
He makes the jigs himself. Not sure where he sources the wheels. I was referring to the Balistic Abrasives wheels..I have several and...
-
Get a CBN wheel. He sells them as does Baltic. However, most anything from Europe right now is insanely priced by the time you pay the...
-
Ketchup replied to the thread Square Jig.I built my own based off this design. It’s not great. You have to dress the wheel a lot. I like hand filing in vise grips better.
-
If everybody mastered carb tuning and chain sharpening, the parts and repair industries would be in serious trouble.
-
Ketchup replied to the thread Saw builders chime in..In the case of 026/260, the intake is highly restrictive. Lots of other saws have a better intake so fooling with the details gains...