Ketchup's latest activity
-
Forgot the pictures -
I put a side tensioner on mine and an 18".050 3/8. 7 tooth rim sprocket and Picco Super full chisel. With the muffler opened up...
-
Had to climb a Pine tree, that the strong winds cut the roots and it was actually holding in the air Tree was inside a Legendary Summer...
-
We also topped another cedar for him. I think it was topped before. The tracked woodchipper we bought is coming in handy big time for...
-
Ketchup replied to the thread The forestry and logging pictures thread.When it dries out it can be pretty hard. I’ve cut a few that were like rocks. The knots are especially bad.
-
Ketchup reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with
Like.
Running echo red armor @ 40:1 Piston / cylinder look decent. wiped things down, tweaked the carb slightly and it doesn't seem to be... -
Ketchup replied to the thread Husqvarna 564xp (g) fuel inject.I completely agree that Dealer only repairs is a deal breaker. Field equipment needs to be field repairable. The 500i has a similar...
-
Project pioneer p50. This saw was purchased as a runner and I swapped some parts over for my other saws. Pretty healthy over all, very...
-
Ketchup replied to the thread Stihl 400 point one predictions?.Pretty sure but I still have it tucked away. I’ll pull at down and look again.
-
Ketchup replied to the thread Stihl 400 point one predictions?.Solid info there. I saw a 500 with a bad mag piston last year. Bad casting from the factory.
-
-
I haven't been entirely impressed with the mag piston ms400. Done a dozen pistons now all different owners with common failures...
-
-
Finally got some oiler o rings, news seals installed,
-
Ketchup reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
ok, I believe I found the source of that knock. I sheared the timing key on the flywheel when the lock washer came loose. I happen to...
