Jusgunn3's latest activity
-
JBrand new Husqvarna 592. I purchased this in March 2023 from Gentlemen. Upon receiving it I sent to Mastermind to work his magic on it...
-
JI got a gallon mixed up of dominator been using in blower will try in saws too… I run redarmor 40-1 and honestly may never switch I’ve...
-
JLet's see some pics.
-
JI'm contemplating on whether I want to change from Dominator now. I stuck my borescope into the exhaust and also into the spark plug...
-
JTTT
-
JBump
-
JFor sale are two Husqvarna BLi300 batteries. $275 each or both for $535, shipped to the 48 states.
-
JBoth brands do since EPA mandated that the tanks can’t vent out into the atmosphere. Pop off needs to be able to hold back pressure...
-
JSpraying cleaner on the carb is not a safe check, as any little bit pulled in around a shaft will kill it at idle. I would suspect that...
-
JJusgunn3 replied to the thread Husqvarna 562xp air leak driving me mad.I have two of these with scored tops ends…thinking real hard about these rebuilds :confused:
-
JJusgunn3 reacted to Maxchaos's post in the thread Husqvarna 562xp air leak driving me mad with
Like.
I picked up this 562xp broken because of bad bearings and seals,as usual. New piston,used good cylinder,changed everything with new OE... -
JJusgunn3 reacted to cuinrearview's post in the thread Husqvarna 562xp air leak driving me mad with Like.
I seem to remember seeing something @huskihl wrote about some interference around the exhaust side of the cylinder after dropping it...
-
JJusgunn3 reacted to redneckhillbilly's post in the thread Husqvarna 562xp air leak driving me mad with Like.
maybe a cylinder head bolt is too long.
-
JJusgunn3 reacted to hacskaroly's post in the thread Husqvarna 562xp air leak driving me mad with Like.
I worked on a 562xp it it gave me fits. Narrowed it down to the carb, an air leak somewhere. The purge bulb would not fill, would just...
-
JI don’t think it will matter with just a gasket delete, but you can check the front left where the transfer cap screw is close to the...