Jusgunn3's latest activity
-
JYou might try the aviation form-a-gasket, if you goof, its cleans up easy, if you need to take the saw apart in the future it helps...
-
JI like to use a thin layer of gasket maker on case gaskets. Usually loctite 5920 copper because I get it free from work. Use dirko on...
-
JThat settles that. I've heard base gaskets tend to leak on 026s. Will sealant + gasket prevent that?
-
JI use aviation form-a-gasket (Permatex) for gaskets (both sides), I think I have the red permatex I use with clamshells. If you have...
-
JPretty good system, still used today. They don’t have a habit of leaking there
-
JI noticed the carb body goes straight to the manifold, no gasket, on this 026 I'm building. Tempted to put sealer there.
-
JI always put a very thin layer of motoseal on both sides of crankcase gaskets. I’m sure it’s not necessary but I figure that everything...
-
Jmotoseal on base gaskets, dirko on clamshells
-
JUsed Motoseal, loctite of some variety, got Reinzoseal now and have used it twice. Vintage motorcycle restoration guy recommended it...
-
JAs a break from arguing about oil, let's talk sealants. Who uses a sealant on crankcase gaskets? Base gaskets? Intake boots?
-
JI seem to be in the minority with Right Stuff (Permatex). I’ve used it fairly extensively and have never had a problem. I’d be slow to...
-
JI use motoseal for base gasket delete
-
JJusgunn3 replied to the thread Sealant or not?.I use it as my base gasket when I delete them. I have been using dirko and hoping I do not have the take the saw apart and clean it off...
-
JJusgunn3 reacted to 59billy's post in the thread Not so pros 4 new and without politics or drama with
Like.
The intersection where I turn for the medical clusterplex where I go is marked by a Wendy's and a liquor store. Just wanted to share... -
JJusgunn3 reacted to sawmikaze's post in the thread Not so pros 4 new and without politics or drama with Like.
This is my new firewood partner at the farm.