Junk Meister's latest activity
-
JJunk Meister replied to the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread?.I got my first hammer somewhere around 6-7 or 8 yrs old. I was in a pox madr out of green cottonwood full inch and nailed with ring...
-
JJunk Meister reacted to Only the Tony's post in the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread? with
Like.
Kinda slow today, had to work for these a bit. Found the fish, they just were not actively feeding for some reason. Still nice to... -
JJunk Meister replied to the thread Stihl ms230 leaking oil.I did do a lot of double checking these possible problems and figgered to set it aside and come back to it later. I guess 4 or 5 years...
-
JThere should be a diagram cast into the plastic frame of the saw showing the proper orientation of the pump. Check the holes inside the...
-
JI’ve already had some that wouldn’t oil until removing and reinstalling the oiler, almost like it had slid and wasn’t lined up with the...
-
JJunk Meister replied to the thread Who makes this chain.There is the answer to your question on post #1 Post #7 shows a box and second line from the bottom 91PXL should get it in 25ft and...
-
JJunk Meister replied to the thread Flippy gas cap leaking........DOUBLE "DITTO" The chains don't Bunch up or leave the cap dangling in the way when you pour.
-
JStihl took two steps backwards with flippy caps. The best caps are on the old saws that had the metal chains and hook that kept the cap...
-
JThe o-rings are never tight. Look at the outer part of the o-ring where it seals against the taper of the tank. If there is a flat spot...
-
JJunk Meister reacted to singinwoodwackr's post in the thread Flippy gas cap leaking....... with Like.
Most of the time a new o-ring will do the trick. But, not always. Oe caps are only $10
-
JJunk Meister reacted to Sloughfoot's post in the thread Anybody else use Sawsuppliers.com? with
Haha.
sue the bastards -
JJunk Meister replied to the thread Anybody else use Sawsuppliers.com?.Rings in the mind like a Mechanic telling you "Yupp We're waiting for the right part Now". an Old GEECH comic/cartoon.
-
JJunk Meister replied to the thread Stihl ms230 leaking oil.I have the opposite problem. One of my MS180 saws won't Oil. I have put in new (AM) then OEM from 025 OEM . Cleaned the galleys from...
-
JJunk Meister replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.Same here I got the 1/8" and the 3/16" ones from "Ericweakland" Pennsylvania Last weak. I have always hand filed so time will tell.
-
JPartner - If you are referring to the ICS Concrete Saw they use a specialized bar and chain. In fact there are several different...