jmester's latest activity
-
jmester reacted to Wilhelm's post in the thread Stihl NGK spark plugs vs. any ol NGK spark plug? with
Like.
Is this the new oil thread? Asking for a friend! -
As stated in the video, I had a brand new 362 MTronic last fall that had a defective white solenoid. First bad one I’ve seen, new or...
-
I did this video a few years ago when the black solenoids were discontinued but still available online and documented everything. The...
-
I ported a MS201TC for a customer in 2021....and it was good for him over several years. Then....it began to idle too high. The saw was...
-
-
-
jmester replied to the thread Stihl 462 and 661 heated 1/2 wrap handles....anyone have any?.I would guess getting one from across the pond is your best bet. I had to source the heated parts for a 500i from overseas.
-
jmester replied to the thread Stihl 462 and 661 heated 1/2 wrap handles....anyone have any?.1142 790 1720 half heated for 462 1144 790 1721 half heated for 661
-
jmester reacted to jacob j.'s post in the thread SOLD Mcculloch Collection SP125s, PM1000, PM850's, PM800, Double Eagle 80, SP70, PM700's, 7-10,s with Like.
You have some real beauties there - whoever buys from you will end up very satisfied.
-
Tool deflection can be a bitc# to work with/against! 12.9 grade bolt steel is some serious stuff! Solid carbide tooling is not...
-
jmester replied to the thread WANTED Stihl EDT 7/8.The stihl edt5 was made by OPPAMA. Oppama model PET-1100.
-
jmester reacted to Bill G's post in the thread Choosing a new heated handle electronic saw...... Husky or Stihl with Like.
One showed up the other day.
-
Most STIHL pistons are machined at the factory in Virginia Beach, some are done in Germany. Back in the day some were bought from Mahle...
-
Have you ever run a 9010? Almost without fail, when I let a customer run one a few minutes, they walk out the door with it. It's like...
-
I would buy an echo blower over a stihl any day of the week but that's just my opinion. I have a stihl 4mix pole saw and I run...
