JIMG's latest activity
-
Good afternoon all. I got super lucky and was able to snag this very nice 681 yesterday. Anybody know of anywhere to get a new air... -
This one came in yesterday just shortly after a visit from hacskaroly... I added an appropriate vintage bar, bar is slightly used...
-
You're most certainly welcome and may it give you much enjoyment cutting for many years to come. I thank you again for the opportunity...
-
The CV models were very fine saws. I have a 5400 that I still use from time to time, and another in the display in my small chainsaw...
-
-
Today we butchered a leylandii hedge, which is nothing new. And i got to use the 28 inch bar from the top of a ladder, which I had...
-
-
Oregon 68209, alternate McCulloch part numbers are 86942, 86944, and 86947. 86942 includes a 3/8-7T sprocket, 86944 includes a .404-7T...
-
(Might take a second . . . ) Philbert
-
Philbert
-
Good morning. ☁️
-
JIMG replied to the thread MCCULLOCH The official McCulloch thread.Just saw Duke's carries archer drum/rim/bearing sets.
-
JIMG reacted to Maintenance Chief's post in the thread MCCULLOCH The official McCulloch thread with
Like.
Yes Oregon sells both small and standard rim sprocket drums. -
JIMG replied to the thread MCCULLOCH The official McCulloch thread.Question for the yellow saw people...On a 700 I want to replace the clutch drum with the large spline type to accommodate an 8T rim. Is...
-
36” on a good running 288 by @Crocky28. It’s my goto medium saw. These all needed the whole bar or more. Tough live oak, mostly worked...