JIMG's latest activity
-
Pics -
Up for sale is a very clean 261/262xp with a Rattler ported cylinder. I converted this with the ported cylinder and a new Meteor...
-
-
JIMG replied to the thread Recommend me a gasket material.Good info, gents. Many thanks. I have some Felpro sheets and a dirko tube on the way.
-
Good to know, I just assumed (we know where that gets you...) from the muffler gaskets out now being a different material than the other...
-
I would use the Felpro gasket paper as @hacskaroly mentioned and maybe fortify it with HT Dirko or the newer Permatex high-heat gasket...
-
Great post, I use similar stuff from Napa. I have used that stuff on mufflers, it will work fine, I have never had an issue. but it...
-
I use Felpro gasket material. You can get it at automotive stores, but usually get a better deal on-line. They come in flat sheets and...
-
I have a couple old machines to put together and I am going to need to cut the case gaskets. I am looking for gasket material suggestions.
-
We were mudding quads and bikes at my friends place all morning. Pics for now, vids later.
-
Nice bucket of saws!
-
JIMG replied to the thread Random pics (that you took) thread....
-
-
Ok, here’s another. MOFO 034 Super vs my self-ported 266xp without any machine work. Same bar and chain and same wood.
-
I made him these racks to store his rough cut.
-
