JacobSaws's latest activity
-
JJacobSaws reacted to dangerousatom's post in the thread Can I plug a pioneer decomp? Building a p26 with
Like.
I do not believe there is a “linkage” at least a physical/mechanical one. Have you taken the saw apart enough to find a linkage. If so... -
JOn most of my saws I just plug the decomp because I don't want any chance with it leaking and I can feel the raw compression lol. The...
-
JJacobSaws reacted to Coupe's post in the thread HELP! Husqvarna 141 very small crank seal leak runnable? with Like.
Run it for a while and see what happens. Sometimes these things want a bit of a run to bed in.
-
JJacobSaws reacted to hacskaroly's post in the thread HELP! Husqvarna 141 very small crank seal leak runnable? with Like.
It's fine until it isn't...those can be tough ones to get all sealed up.
-
JJacobSaws reacted to Brad Button's post in the thread HELP! Husqvarna 141 very small crank seal leak runnable? with Like.
This is what Stihl's leak-down test says, Use rubber bulb to pump air into the engine housing until the gauge shows a pressure of...
-
JJacobSaws replied to the thread HELP! Husqvarna 141 very small crank seal leak runnable?.Yes, on the outside of the seal. It's the inner part of the seal (between crank and seal) that's leaking and I can absolutely not figure...
-
JJacobSaws reacted to Brad Button's post in the thread HELP! Husqvarna 141 very small crank seal leak runnable? with Like.
Did you put a light coating of Dirko or other sealant around the outside of the seals before installing?
-
JJacobSaws reacted to Duce's post in the thread HELP! Husqvarna 141 very small crank seal leak runnable? with Like.
Most husky manuals will give accessible pressure drop after 30 seconds. I would run it, but it’s not my saw. Like was stated, I always...
-
JJacobSaws replied to the thread HELP! Husqvarna 141 very small crank seal leak runnable?.Mines soon to be in a box as well😂 I'm just going to put it all back together and hope it's fine...it's such a small leak.
-
JJacobSaws reacted to jacktheripper's post in the thread HELP! Husqvarna 141 very small crank seal leak runnable? with Like.
I got one of these in very ugly condition, and I gave up on rebuilding it because I couldn’t get the seals to actually seal to the...
-
JJacobSaws posted the thread HELP! Husqvarna 141 very small crank seal leak runnable? in The Repair Shop.I'm about done with my Husqvarna 141 build. I bought as a parts saw, cleaned it all up, and replaced many parts. I go to run it for the...
-
JJacobSaws replied to the thread The Swap Meet Thread.Looking to get my hands on a recoil for the pioneer farmsaw. I believe its 475324 or 475323. I have a parts saw and the recoil is one of...
-
JJacobSaws reacted to Mastermind's post in the thread LRB Piston/rings for P40 P41 P42 and Farmsaw? with Like.
Use the swap meet thread, it's pinned at the top of the chainsaw forum.
-
JJacobSaws reacted to hacskaroly's post in the thread LRB Piston/rings for P40 P41 P42 and Farmsaw? with Like.
When you post your list of what you are looking for, post a couple of photos of the saw. Having a visual to go off of helps those verify...
-
JJacobSaws replied to the thread LRB Piston/rings for P40 P41 P42 and Farmsaw?.Well, the odds of someone selling this part. I thought I needed to make a listing and ask if anyone had that part and was willing to...