jacktheripper's latest activity
-
Let me know if you want anything! -
-
Let me know if you want anything!
-
-
I have these 041’s up for grabs. The two “complete” ones don’t have good compression, but are fairly complete. Lots of parts here too...
-
-
jacktheripper posted the thread SELLING Jonsered 451ev and 2054 projects in Whole Chainsaws for Sale/Trade.I have these two projects up for grabs. They’re both missing some parts. The 2054 looks to need just an air filter and trigger parts...
-
-
You ever been to Ricketts Glen park?
-
I have one with jb weld. Its not pretty but it doesn’t leak.
-
Jbweld is what I've used on a dozen mag tanks, the sealer is a little $$ but the can I bought is probably gonna last me my lifetime...
-
jacktheripper replied to the thread WANTED Jonsered 625/630/670 air filter cover.I’ll step in as second in line for one, please!
-
That hole is right next to a seam which is probably glued so welding is probably not an option as you'll burn the glue out.
-
Hello, New here. Thanks for accepting me. I bought a Homelite XL-12 today with the original receipt and owners manual. I will be...
-
Welcome Wahomey
-
Same AM 372 muff...just drilled out the tiny pipe, made the hole bigger, welded on a deflector. Port-matched the inlet to the widened...
-
I would favor JB Weld, grind or sand (coarse grit) around the hole, JB all around, press in a piece of screen wire and finish with JB...
-
I would not worry about the tank sealer, generous amounts of JB weld on both sides around the bolt will work fine.
-
Some shelving like you would see in a parts room (Usually gray) used a 1/4"NC stove bolt with a flat screw driver slot and the head is...
