jacktheripper's latest activity
-
jacktheripper replied to the thread Saw builders chime in..I’d like to try to modify an 036 to run a max flow filter. I think I would have to add longer carb studs to the carb box, modify an 044... -
jacktheripper replied to the thread Saw builders chime in..Exactly. And worse, on the older 026’s you still have a continuously driven oiler and have to farther modify the saw if you wish to run...
-
Ok, I like that!
-
I’ve never run a 242, but I would bet pretty good money that a ported 543 will hold its own against a ported 242
-
I want one as well, have a 543xp that is going to get messaged by @huskihl but have heard its not as impressive as the 242xp…I guess I...
-
Dang. Gotta get a 242xp now.
-
I’ve split quite a few cases on some huskys but this will be the first for a stihl
-
Well honestly thought about selling it it come in with a lot of other saws. I just found out the case is leaking bar oil. Removed the...
-
They come with extras. It just has less extras.
-
File or grind off the sharp points and run it. Besides, that looks like a flat top, no decomp and those are pretty scarce. The best 066...
-
That will cause nothing at all. It’s also on the cooler side of the cylinder.
-
jacktheripper reacted to singinwoodwackr's post in the thread The Husky 42/42 special/242/246 thread with
Like.
Got my 246 all stripped down and cleaned, case mag rot repaired and case halves painted. Just need to reassemble. -
jacktheripper replied to the thread HELP! Cracked fins 066.Run that puppy
-
jacktheripper replied to the thread Saw builders chime in..I gained 1500+ rpms in the cut by switching from a stock flocked 026 filter to a fine mesh 260 pro filter. I had to modify my top cover...
-
-
jacktheripper reacted to Noway johannes's post in the thread The Husky 42/42 special/242/246 thread with Like.
Mine 242, 2 of them splitt and new bearings the others new seals and cleaning, one more on the bench miss som parts.
