J.w Younger's latest activity
-
J.w Younger replied to the thread MS 241.Thanks, if it starts acting up again I'll replace the solenoid and filter. The throttle stop is an allen headed set screw only... -
J.w Younger replied to the thread MS 241.
-
-
J.w Younger replied to the thread MS 241.
-
-
I would suspect that. Every regulator I've installed there is a tiny screw to adjust voltage to spec, might be worth checking. My main...
-
J.w Younger replied to the thread HELP! Craftsman generator.China
-
Craftsman (generac) 3500w generator overcharging. Is there anything other than rpm or voltage regulator that can be causing it. With...
-
Fuel Solenoid. They are color coded depending on version of Mtron. Kit will include the proper fuel filter to keep very fine...
-
Only two solenoids cover all saws, old saws had black which is replaced by green and white is replaced with white. So just the new...
-
Buy a green solenoid and a new fuel filter, it's not that complicated.
-
J.w Younger replied to the thread MS 241.I turned the idle stop screw about an 1/8 and it hasn't stalled one time in 3 tanks.
-
Here is an on-line IPL for the 241, you can use it to get part numbers if you need to look up others in the future. DIY Spare Parts -...
-
Here is what the part number is in the 2021 IPL: 0000 120 5110 Solenoid valve
-
J.w Younger replied to the thread MS 241.I'm finding one for the 261 but so far no luck on the 241, do you know if they are the same?
-
Solenoid and filter kit seems like a good first step.
-
MS241 wont idle, stalls a lot. Any thoughts?
