isaaccarlson's latest activity
-
isaaccarlson reacted to BuffaloBill's post in the thread 1st Porting Attempt, an MS200T Clone with
Like.
Yes, I should try that. Presently that plug base still has the metal compression washer on it. But I could remove it and turn a... -
I’d lose the popup personally. It already looks like it will have enough compression based on the chamber size. Did you pull a...
-
isaaccarlson reacted to huskihl's post in the thread Porting tools what's out there for the poor man like me. with Like.
It’s better than renting pigs
-
isaaccarlson reacted to Stump Shot's post in the thread Porting tools what's out there for the poor man like me. with Like.
transmission fluid might work well too. For now, I have some tap magic in a jar and dip the burr lift it out and give it a spin to rid...
-
isaaccarlson reacted to IffykidMn's post in the thread How many wheelbarrow loads are in a cord? with Like.
short weekend and or small fires maybe. ;)
-
isaaccarlson replied to the thread Rakers?.I just picked up some C85 loops. Going to try them out.
-
It Seems to me there is very little savings by the 25 ft roll especially with being a few DLs' short or a lot of extra ones . If you...
-
isaaccarlson replied to the thread Rakers?.I have 3 different sizes of chain, so that means I have to spend north of $1,500. Buying new bars to convert to 2 sizes of chain...
-
i sharpen every new chain before i even run it and take two or three cuts off the rakers too
-
I loved it when I get a chain filed perfectly and it's self feeding
-
Raker is a throwback term from crosscut saw blade terminology. Depth gauge is more accurate. Unless it’s absolutely unmanageable, I...
-
How many swipes did you take? I filed a buddies chain, took 3 swipes with a flat file. He was amazed at the cut after. He had cut wood...
-
isaaccarlson replied to the thread Rakers?.Yep. I have to take em down on every chain I get. I used to sharpen at least 3 times before touching them, about 20 years ago. Now I...
-
Not turkeys But White Tail deer have stopped to watch While I sharpen the saw. One Time they went running by and I caught a movement at...