IffykidMn's latest activity
-
IThanks. I’m not promoting or disparaging HF: I just recall that from an earlier post (somewhere), and it seemed to fit the discussion...
-
IIffykidMn replied to the thread Calling Out The Internet BS.Thank you for providing links. I have seen some of the Turnbull work having interest in both SASS and NCOWS and done a few small pieces...
-
IThe coloring is certainly attractive, and now is done mainly as decoration, but casehardening was originally used to harden the outer...
-
IThank God we finally have another oil thread🙄
-
IIffykidMn replied to the thread Calling Out The Internet BS.Interesting👍 I always thought of color case hardening as decorative in nature as relatively low heat surface and not structural...
-
IAs @Woodtroll suggested, it might vary with different products, treatment methods, etc. This was a ‘quick-and-(not too) dirty’ test on...
-
IThis is where a lot of the argument comes from. People disagree with it so they sand off the paint and think it proves their point when...
-
IIffykidMn replied to the thread Calling Out The Internet BS.Thank You! :thumbsup: Color me blue guess I envisioned the coloring penetrating deeper as the line is further back from the bar rail...
-
IAssume that, at one time, it was done with a wire brush or wheel, until someone sold them a belt sander. Philbert
-
IInteresting. I would have bet a fair amount on that bluing being deeper, but I guess it’s just oxidation color?
-
IDid a quick test on a ‘scrap’ bar: Blue line came right off with a little buffing, using 320 grit, ‘Wet-or-Dry’ sandpaper. Also came...
-
IIffykidMn replied to the thread Calling Out The Internet BS.Perhaps my use of the natural finish bars was to general in nature. The Sugihara light and Huskie tough light bars as well as a...
-
IIffykidMn reacted to singinwoodwackr's post in the thread How Often Do You Adjust Your Carb? with
Like.
Unless you change elevations on a regular basis the carb should be just fine for years. -
II’ve got a couple of auto tune Husqvarna’s and a bunch of normal carb’s chainsaws. Thinking about a Stihl MS 261 and debating the...
-
IIffykidMn replied to the thread Calling Out The Internet BS.What is the difference in bar rail hardness between a painted bar and a natural finish bar? Asking the same question in a different...
