IffykidMn's latest activity
-
Icanola oil polymerizes with heat into burnt sugar like crap that bonds to the cylinder/flywheel fins that does not easily come off...
-
II can't find the Harvest King near me. ?Is it the same as County Line sold at Tractor Supply?
-
IIffykidMn replied to the thread Simple Chain Filing Vise.I have been clamping a spare or a cut off length of junk bar in the bench vice.
-
IDon't like how they look.
-
II’ve been using .325 x .050 with no issues.
-
II have a box of 15 Winchester 3" rifled slugs I would like to give away to a youngster just starting out. There should be plenty to...
-
IIffykidMn replied to the thread Looking at upgrading and would welcome advice/opinions..I have ran down to -10f without the shutter and never had icing problems, not many winters anymore that it does not warm up to at least...
-
IIffykidMn reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with
Like.
That's what I'm thinking. Plus the manual says running in winter mode above 50 can cause catastrophic engine failure, so if you forget... -
IIffykidMn reacted to tree monkey's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
cold air makes power. just saying
-
IIffykidMn reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
I pulled it harder than I should have until I broke the first spring, it took years. Been trying to go easy since then but have been...
-
IIffykidMn reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Went with the m-tronic because of the temp range I work in. Speaking of that, the manual says to "winter mode" below 50°. That seems...
-
IIffykidMn reacted to tallgrass_coyote's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Ran out of furlough projects and the weather finally cooled down. Cut about 60 trees yesterday morning and had some 16-18" to deal with...
-
IIffykidMn reacted to Bill G's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
The 261 will serve you well
-
IIffykidMn reacted to jeffkrib's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
Steep rocky ground, cutting mainly small stuff, the 261 is ideal. If you are mainly cutting 24" stuff then 60cc would be the go. You...
-
IHave for sale a new ported 500i, ported by Phil Schukraft. Saw has only been ran by Phil after porting. Included are wcs shorty...
