heimannm's latest activity
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.I'm yellow with envy Squareground, second generation 7-10 with a full wrap, very nice. Mark -
heimannm replied to the thread So what did you buy today.Analog clocks to keep the younger generation wondering what time it is. Here's a twist... Mark
-
-
heimannm replied to the thread What's on your bench?.With the success of the DA 211 I was inspired to see what could be done with the one man DO 101. Pretty rough to start with. As...
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.Saws with the hockey mask cover over the flywheel were usually S44-A or S55-A. The 44/55 saws were real hot rods in their day. The...
-
-
heimannm replied to the thread Are 1/4 pitch 0.050 chains like 13RMS and H00 compatible with 71PM3 type spur sprockets?.Although the pitch is the same, the chassis height is different and will require a different sprocket to fit each chain correctly, much...
-
-
heimannm replied to the thread SELLING Efco 152 .... John Deere CS52.Do you have any photos Bill? I know a guy that would be interested in it. Mark
-
heimannm replied to the thread Vintage Chainsaw Museum.We moved a few German saws into the new display area today to keep the Swedes company. I brought over a few other (non-Stihl) saws...
-
-
heimannm replied to the thread Looking for ideas on broken stud removal.I have had some success using a small end mill to create a flat surface, then drilling the broken bolt/stud enough to get and easy out...
-
heimannm replied to the thread What's on your bench?.We got the Disston back together and running on prime. I didn't want to mess with the crusty fuel tank and filter so this is as good as...
-
heimannm replied to the thread What's on your bench?.For the curious... As received 2 bolt on cyliders Mark
-
-
heimannm replied to the thread What's on your bench?.Disston DA211. I've had this saw for over 5 years and I decided it was time to get it cleaned up so I can put it in the display...
-
-
heimannm replied to the thread JONSERED Jonsereds.We moved the Jonsereds saws into the new display area on Saturday, I have a few more in place this morning. I thought the Comet should...
-
-
heimannm replied to the thread JONSERED Jonsereds.Ed - start with the basic adjustments first, try setting the L 1-1/4 to 1-1/2 turns out from lightly seated and turn up the idle speed...
-
heimannm replied to the thread Vintage Chainsaw Museum.We moved a few saws into the new display area today. We also moved these Orline powered non-saws; drill and generator. The Orline...
-
-
heimannm replied to the thread What's on your bench?.I finished putting the Orline powered generator back together. Mark
-
