heimannm's latest activity
-
heimannm replied to the thread What's on your bench?.I will post the video if it ever gets up on YouTube... short answer, yes. oils too. Mark -
heimannm replied to the thread What's on your bench?.All done and in the display now complete with the original A-8 Auto Mac self sharpening chain. Mark
-
-
heimannm replied to the thread Old Homelite project 🤔.I have used some similar heat shrink tubing for handle bars, you have to work it pretty carefully to avoid wrinkles in the inside...
-
-
heimannm replied to the thread Old Homelite project 🤔.I don't know those two in particular, but in general all that I have tested were around 0.2 - 0.25 µF. Mark
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.I think we have a solution for the missing 55063 "capillary seal" in the fuel cap for the older and large frame saws. McCulloch tried...
-
-
heimannm replied to the thread HOMELITE Homelite Thread.Thanks Tim - Chris Bean has given me the same information. I have some ordered from LRB, I will report back once they arrive. Mark
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.Too tired to repost it all, but we worked through a primer on the BP-1 today. Details may be found on AS...
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.Those covers will be interchangeable. Some of the older saws had a different arrangement for the stop button, but even those will...
-
heimannm replied to the thread What's on your bench?.BP-1 is (was) a unique "balanced piston" design with one piston firing, and the other acting as a counter balance and sliding intake...
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.The starter assembly from almost any left hand start saw will work other than the SP125 and 1-40/1-50 saws. The SP125 starter will work...
-
heimannm replied to the thread So what did you buy today.https://www.google.com/search?q=5752557-03&sca_esv=4ba3af865432350d&sxsrf=ANbL-n4T_J_VuS7e8Xg9mBakF8iJLAAsBA%3A1768617032810&source=hp&ei...
-
heimannm replied to the thread What's on your bench?.The BP-1 is getting a good clean up, I will do my best to make it operational, then fit it with an Automac bar and chain and put it in...
-
-
heimannm replied to the thread What's on your bench?.Yes
-
heimannm replied to the thread HOMELITE Homelite Thread.For now I decided to put it together as it is and keep it in the display. If I can find a good source for those seals I will acquire a...
-
-
heimannm replied to the thread HOMELITE Homelite Thread.It was also locked up. During disassembly it spun over, then locked up again... Plain aluminum bore cylinder and chrome plated...
-
