heimannm's latest activity
-
heimannm replied to the thread Vintage Chainsaw Museum.The stairway will be very nice one the inventory is moved into the new building, at present it is a long ways from the shop to the parts... -
heimannm replied to the thread Vintage Chainsaw Museum.I've been slacking on my progress reports. After several attempts the concrete floors are done, grind and seal up front and solid color...
-
-
heimannm replied to the thread What's on your bench?.The 350CS is cleaning up nicely, but the piston is done. For whatever reason, these were built with a plain bore cylinder and chrome...
-
-
heimannm replied to the thread What's on your bench?.This Remington SL11 was pumping a lot of air and very little oil. The pickup in the tank was pretty plugged and the line from the oil...
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.Getting the engine in and out of the case has been challenging for me on the MM6. I know you must pull the starter rope out a foot or...
-
heimannm replied to the thread ECHO Echo, Echo, Echo.I believe I found the spot for that spring, not shown on the IPL but the only place I could come up with. Putting the saw back...
-
-
heimannm replied to the thread Looking for Tillotson HL63.You could probably find another saw for under $50, would be cheaper than me sending you an HL63. If the MAC 9 is one with a choke, I...
-
heimannm replied to the thread So what did you buy today.Furb - that is fantastic. I certainly remember playing with one like that as a young boy, you press the dump bed down and moving that...
-
heimannm replied to the thread Fixing hole in tank.$25 for 8 ounces of POR is not less expensive than $40 for a quart of Red Kote. I have used POR15 in the past and will say that in my...
-
-
heimannm replied to the thread ECHO Echo, Echo, Echo.I have a local guy volunteering in the shop these days, he searched through the IPL and found 18 springs, but all were accounted for in...
-
heimannm replied to the thread ECHO Echo, Echo, Echo.Ray is the greatest of all times! Thanks Old 040 as well. I have already been able to find that bumper in the photo above on the IPL...
-
heimannm replied to the thread JONSERED Jonsereds.Thanks Jay. I found this information on Another Site. Based on this, I have a 21238 coming from eBay. Looking at the eBay photo...
-
-
heimannm replied to the thread ECHO Echo, Echo, Echo.I am in need of a good IPL for a QV8000. While disassembling this saw, I discovered two pieces on the bench that mysteriously...
-
-
heimannm replied to the thread SELLING Jred 930 super.I'm watching with interest...
-
heimannm replied to the thread Fixing hole in tank.I have sealed 40+ tanks using Red Kote with only one mishap, in that case I did not allow the Red Kote to fully cure and the tank weeped...
