heimannm's latest activity
-
heimannm replied to the thread JONSERED Jonsereds.We also went through the 520SP today to prepare it for the display. I will have to say, compared to the 49SP this one is a lot more... -
-
heimannm replied to the thread JONSERED Jonsereds.Thanks to el33t I bought the LRB piston for the 451E, piston arrived yesterday so I put it back together today. Everything works just...
-
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.I went ahead and put a D-44 together using a few cracked or broken parts (crankcase cover, starter cover, starter base). New rings...
-
-
heimannm replied to the thread STIHL The Official Stihl Chainsaws Thread.The lumberyard down the street from my building manufactures surveying stakes of all sorts. Most start with an 8' unit of 2x3, 2x4, or...
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.Sloa - the "7" saws are direct drive and the "8" saws are gear drive, I don't think the handle bars will interchange. Copper tubing...
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.I took a 44 apart yesterday to try and find a good crankcase cover for CBFarmall, unfortunately this one turned out to be broken as...
-
-
heimannm replied to the thread JONSERED Jonsereds.Since the hand guards for the 70's vintage saws are hard to come by, I took the parts from a 621 that I have in the shop and put them on...
-
-
heimannm replied to the thread JONSERED Jonsereds.I spent a lot of time on other items today, but I did get the 451EV back together and operational. Radical transformation... I will...
-
-
heimannm replied to the thread JONSERED Jonsereds.Cleaning continued today. My son took over this afternoon while I spent some time taking care of my lawn. 5+ inches of rain this week...
-
-
heimannm replied to the thread 1955 Sears Craftsman paint sprayer oddball.This one is a compressor and a generator.
-
-
heimannm replied to the thread So what did you buy today.Yes, that is was was reported in the USGS report. I'm sure the Nat Geo special also talked about CO2. Mark
-
heimannm replied to the thread It has landed..I got a new saw this week myself. Not quite as nice as a 500I but more along the lines of what I needed. Mark
-
-
heimannm replied to the thread MCCULLOCH The official McCulloch thread.McCulloch fans are slacking this week... Old photo by the way. Mark
-
-
heimannm replied to the thread So what did you buy today.Tor - you will find that little slide hammer quite useful if you work on many older carburetors and need to replace the nozzle check...
