Harald H's latest activity
-
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.This 42 crankcase is also corroded, luckily in the oil tank, I wonder if the corrosion will continue or not, I did dremel and paint it...
-
HInterestingly, if Duke has not received bearings that follow the specifications of the original bearing, there is a good reason not to...
-
HI installed a piston with windows / It's a pity that you didn't read the previous posts, there are not too many of them
-
HAftermarket 242 piston is the only one available that I know of. Don't buy the Meteor as the crown is 0.8mm too low on it.
-
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.Thank you. I probably would have done that if you didn't tip me.
-
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.I will look again, thank you.
-
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.Hi, thank you for the clarification around the PTO bearing. I did actually already split the case and put it together again with SKF...
-
-
HHarald H reacted to hacskaroly's post in the thread The Husky 42/42 special/242/246 thread with
Like.
That I don't know, if I had a 42 I would give it a try unless you can find a parts saw and can take the existing bearing off of it to... -
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.This is why I thought it is leaking, I see now it is from 2021, and they probably sell a better product now.
-
HI don't know if they have been tested and leak. What I do know is that someone tried the 6201 that comes with plastic protection, and...
-
HHi Harald and welcome to OPE. The crank bearing on the chain side (PTO) has been discontinued by Husqvarna, must be close to 10 years...
-
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.Thank you! I thought it was tested by others on this thread and that it is leaking air? Or was that a different bearing?
-
HHarald H replied to the thread The Husky 42/42 special/242/246 thread.Hi, I'm new to this group, I live in Norway and find it very meaningful to repair chainsaws. Because of this I have an old Husqvarna 42...
