hacskaroly's latest activity
-
$40 straight cash Homie -
Couple more pics from Mikes potatoe phone.
-
Actually the 2100 could have either the Bosch or the SEM ignition, as well as one other, the name of which escapes me right now. Each...
-
Get it running and spray the intake block with brake cleaner or any aerosol lubricant or solvent you've got at hand. It'll studder or...
-
My FS80 going on 28 years, and still running great, put a new carb on it 2 years ago, they don't make them little 2T like that anymore,
-
Well, at 64 I don't think I will be needing 25 years out of any new yard equipment. How do "I look for a cracked intaake block?
-
I doubt you will get 25 years out of a 70, and I’d be surprised if you like the weight of a 91. Check for air leaks on the 80...
-
hacskaroly reacted to heimannm's post in the thread Are 1/4 pitch 0.050 chains like 13RMS and H00 compatible with 71PM3 type spur sprockets? with
Like.
Although the pitch is the same, the chassis height is different and will require a different sprocket to fit each chain correctly, much... -
Thanks for your input, had thought the same but as a last resort. Positioned the saw and put some WD40 on plug base and let it sit...
-
I would try to heat the head around the spark plug quickly as I could with a propane or mapp torch, to expand it to allow the plug to be...
-
And they will make the threads significantly stronger.
-
hacskaroly reacted to Duane(Pa)'s post in the thread Looking for ideas on broken stud removal with Like.
Nothing to add to the removal suggestions. I'm subbing to the thread. Don't stress too much about wrecking the threads, a Time-Sert will...
-
hacskaroly reacted to SimonHS's post in the thread Looking for ideas on broken stud removal with Like.
This. Deep centre punch mark on the stud. Don't try a handheld drill. Clamp the head on a drill press. Run the drill in reverse with...
-
hacskaroly reacted to legdelimber's post in the thread Looking for ideas on broken stud removal with Like.
Arcing is one issue with something getting hung. But you'd be amazed at how well a layer of oxide/rust can impede heat travel for a...
-
hacskaroly reacted to Jusgunn3's post in the thread Looking for ideas on broken stud removal with Like.
Reverse drill bits and easy outs…