hacskaroly's latest activity
-
1 is Stretch the handsome 11 year old multi thousand dollars cat. 2 is the new kittens from late summer. The 2 boys yellow and black... -
I often blow some glass beads down the transfer tunnels in a cylinder after I port the transfer ports, just to clean up any casting...
-
I have a 9010 blower that was running and now it won't start. I checked for spark and I replaced the spark plug and the carburetor. I...
-
Have you tried using ether or dumping some fuel in the intake to see if it is still starving for fuel? How about compression check of...
-
hacskaroly reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with
Like.
FWIW, I opened the boxes today (thanks Dan!). In my case it is a 1-82 that is stamped with both 1-72 and 1-82 with the 1-72 struck... -
Surface preparation tool from Harbor Freight. Mark
-
hacskaroly replied to the thread Husqvarna 3-Series lot build.Looks real good!!
-
5min, all 4, lol
-
Ah, hadn't tried that...have glass bead booth 😃
-
I boil cylinders in straight Purple Power and it does pretty good with carbon. It doesn't get all of it but it gets most of it. Another...
-
Glass bead blaster takes carbon out of a chamber really well.
-
2+ days of soaking in Sea... It got some of it :p Getting the exhaust port cleared is easier :p Not easily chipped out with a...
-
Ah, so it is a concentrate at 99%, not used straight. Same question, however. Is this something that can remain in the US tank for...
-
The concentrate is mixed to 10% to 20% in solution with water. It's good for more than one use. I used a gallon of mix to clean a dozen...
-
hacskaroly replied to the thread Husqvarna 3-Series lot build.SAE 30 most likely 🤣
