hacskaroly's latest activity
-
hacskaroly reacted to DND 9000's post in the thread HELP! Carb leaks fuel in throat when primed with
Like.
Don't use pump fuel. Use some type of alcylate fuel like Aspen or something similar and you will not have these problems. Also run it... -
hacskaroly reacted to SawAddictedFarmer's post in the thread HELP! Carb leaks fuel in throat when primed with Like.
These carbs are cheap. Just replace it and run good fuel and you should be good for another 5+ years.
-
hacskaroly reacted to stihl #1's post in the thread HELP! Carb leaks fuel in throat when primed with Like.
Tom that carb is most likely not repairable. There is an 0-ring on the accelerator pump that if bad, may be leaking fuel, or the high...
-
hacskaroly reacted to EFSM's post in the thread HELP! Carb leaks fuel in throat when primed with Like.
If fuel is getting to the throat during priming, the one check valve in the primer base is leaking. It is the one under a welch plug on...
-
hacskaroly reacted to Tom hadlow's post in the thread HELP! Carb leaks fuel in throat when primed with Like.
Hi all I have a carb from a FS91 that when you primed the carb fuel leaks out in to the throat of the carb. How do I go about fixing...
-
I wanted to update this thread . My inbred stubbornness got the better of me and I pulled it off the shelf this morning . Reset the high...
-
hacskaroly reacted to redneckhillbilly's post in the thread Husqvarna 562xp air leak driving me mad with Like.
maybe a cylinder head bolt is too long.
-
hacskaroly reacted to cuinrearview's post in the thread Husqvarna 562xp air leak driving me mad with Like.
I seem to remember seeing something @huskihl wrote about some interference around the exhaust side of the cylinder after dropping it...
-
hacskaroly reacted to Maxchaos's post in the thread Husqvarna 562xp air leak driving me mad with
Sad.
I picked up this 562xp broken because of bad bearings and seals,as usual. New piston,used good cylinder,changed everything with new OE... -
hacskaroly replied to the thread Husqvarna 562xp air leak driving me mad.I worked on a 562xp it it gave me fits. Narrowed it down to the carb, an air leak somewhere. The purge bulb would not fill, would just...
-
Exactly.
-
It's easy to repair one chainsaw or even send it to someone for rebuilding, but when you have 10 or more 😉 you're not in such a hurry...
-
A RAT ROD SAW
-
The other year I sold a running 024 for $40 :facepalm:. It was worth more than that, but it was to a long time customer and I had picked...
-
hacskaroly replied to the thread HELP! 024/034 Stihl values.I think he was talking about the local folks that think they are all that and a bag of chips with their 180 and their attempt to cut...
