hacskaroly's latest activity
-
I cannot even finish post or upload pictures w/o advertisements interupting my post ? -
hacskaroly reacted to heimannm's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Some time back a local guy brought in this MS210, I'm pretty sure the damage was a result of being flooded badly and trying to pull it... -
Comparing the 590 to 620, the 620 has a rim sprocket, aluminum side cover w/ captive nuts, dual felling spikes, unlimited coil, metal...
-
Currently on my workbench: a reed valve block for cylinders with a round intake. The base is currently a Husqvarna 372. However, the...
-
I am a bit more redneck... old school. We used disc blades and a old tire to feed sows for years. They lasted forever and the old gals...
-
These are in decent shape yet, just not the type of blade I want to run. I have 12 sold as "Cowboy Wok's" and have to get to building...
-
Installed knockoff WT657 carb, connected lines from OE WT391. Purge bulb worked and no leaks started without the ripping my arm out of...
-
Guide Bar Straightener Another ‘NLA’ item to keep an eye out for at garage / estate sales. Hydraulic presses are used for some...
-
I wonder if he’s putting a new piece of tube in that is on the small side.
-
The little piece of tube? Just press it into the cyl. The impulse barb of the carb mount holds it in place. No oil or grease needed
-
A smear of grease works fine. All rubber used in chainsaws should be oil resistant, and the intake tract definitely is. On a side note...
-
I would think 2 stroke oil would be compatible with impulse lines... :rolleyes: ...
-
Could someone tell me if there is a Specific Method in Installing the Little Impulse Grommets on a Husqvarna Model 55 Cylinder which are...
-
It was pretty dirty when I got it, held vacuum and pressure excellently, but will need new seals due to age. A hidden defect...
-
I appreciate the input Bill and fellas. You led me to realize that I better clarify a little. I have never been too fond of the 5...
