hacskaroly's latest activity
-
Well damn you pretty much know everything huh?? -
Jbweld is what I've used on a dozen mag tanks, the sealer is a little $$ but the can I bought is probably gonna last me my lifetime...
-
I installed new bearings and seals on Thursday, let the Dirko cure for a couple of days, and put the blower back together today and ran...
-
Welcome Wahomey
-
Hello, New here. Thanks for accepting me. I bought a Homelite XL-12 today with the original receipt and owners manual. I will be...
-
Happy 10th, what a great OPE family.😍😍😍 10 back, just a 55 rancher bone stock. Hope we all meet at 10+ more. ♥️♥️♥️
-
Moving along but I broke a ring dammmmmit!
-
hacskaroly replied to the thread Old Homelite project 🤔.I've done that more than once!!
-
That hole is right next to a seam which is probably glued so welding is probably not an option as you'll burn the glue out.
-
There is a Facebook page called Bebber dido that is stealing peoples saw images and posting them as theirs. He stole my saw pictures and...
-
I blocked it and reported it as a fake page/not a real person. I dislike AI.
-
I would favor JB Weld, grind or sand (coarse grit) around the hole, JB all around, press in a piece of screen wire and finish with JB...
-
I’m leaning pretty heavily toward just putting a nut and bolt in with a grommet or rubber washers to seal it. I can access the hole...
-
Some shelving like you would see in a parts room (Usually gray) used a 1/4"NC stove bolt with a flat screw driver slot and the head is...
-
hacskaroly replied to the thread Fixing hole in tank.I would not worry about the tank sealer, generous amounts of JB weld on both sides around the bolt will work fine.
