hacskaroly's latest activity
-
hacskaroly replied to the thread So what did you do today?.Yes it was, and almost looks shiny brand new now!! -
I went through a Stihl TS350 for a guy a few weeks ago, when he picked it up he left a Jonsereds 520. It was a filthy little saw...
-
hacskaroly replied to the thread So what did you buy today.Is that a 2100 or one of the smaller variants? Yeah, parts are fun to find, post what you need, never know who has what!
-
I bought another saw today that will consume my time finding parts. It sounded mean with a shot of gas in the spark plug hole though.
-
If you don‘t have the tools to pressure check things the cheapest option may be to buy an aftermarket carburetor and try it. I know mine...
-
I’ve been working on a Stihl 361 and the only issue I’m having is the carburetor pushing fuel out when the saw sits. When I take the air...
-
pop rivet and redkote?
-
I have fixed a couple of holes in tanks using JB Weld applied from the outside only. Just make sure it's roughed up a little, is clean...
-
I would thread it with an 1/8 inch pipe tap then screw a brass plug in with loctite on it until it tightens up then grind the outside flat.
-
I would think if pressed in fuel lines and tank vents don't leak then a tight fitting low profile rubber plug you could drill the tank...
-
Cut a bed load off the pile, took it home and split all the maple. Not sure why I brought home the gum. I’ve split several face cords of...
-
Or, repair the wire
-
I can remember when gas was 39.9 per gallon and that was in the northeast ( 1967 )
-
hacskaroly replied to the thread Fixing hole in tank.With that you risk having something sticking out and potentially catching on something. One thing you could do is put some JB weld on...
-
Awesome! Thanks fellas. My dumbazz pinched the plug wire against the flywheel when putting the starter cover back on.🤦
