hacskaroly's latest activity
-
If you are just interested in getting a 350 back up and running well in a stock configuration, addressing the three issues above should... -
The last big problem area for these saws is the mufflers rattling themselves loose. On some saws this led to exhaust gases burning a...
-
The next problem spot I want to address (only applies to saws with the cylinder riser) is the cylinder riser. On every single 350 I...
-
The first problem area on these saws that I want to cover is the intake boot clamp. Husky for some reason decided to use an integral...
-
Alright gang, sounds like there is enough interest in a thread on building husky 350's and their related plastic-cased variants (Husky...
-
hacskaroly reacted to Sloughfoot's post in the thread DIY first cut rails for small logs around 14" diameter? with
Like.
I always built my rails out of straight 2x6 when I was milling. Short ones screwed to each end level and the rails screwed to outside... -
hacskaroly reacted to MtnHaul's post in the thread DIY first cut rails for small logs around 14" diameter? with Like.
From time to time I come across some logs that I would like to mill into beams for outdoor projects such as stairs, garden beds, small...
-
Another 50 below F day Shop furnace took 3 hour to get going today
-
Now the truck is loaded and it won't slide as much 😉👍
-
hacskaroly reacted to ammoaddict's post in the thread Any Chinese chainsaw and chinese parts discussion with Like.
I wonder why they discontinued them. They seemed to be very popular.
-
hacskaroly reacted to Czed's post in the thread Any Chinese chainsaw and chinese parts discussion with Like.
For some reason the 268/272 am muffler's are not very durable I've had a few come apart I've started adding brazing around the welds on...
-
Good luck with that…
-
Are you Gonna Caption it with an acronym "GFY"? Tourette Syndrome can be a serious problem.
-
quart and a half of H20
-
Missing the lower 2nd part of the tube, lol
