hacskaroly's latest activity
-
Well, it looked to me like old carbon buildup with new scratch lines. Seemed like maybe a case of a good used piston + saw that had... -
It’s going in a 056 Mag II.
-
hacskaroly reacted to Bill G's post in the thread 2025 Christmas Giveaway Saw MS390 - Boedy @ Empire Builders (Closed) with
Like.
I hope Logan....aka @LAWN BOY wins -
Now look what you've done:facepalm: I raffed
-
Valvoline Restore and Protect at 29:1 for three tanks="problem" solved.
-
What saw is it? an older saw with no side transfers will leave oil in the CC more then ones with them. . .
-
Id say crappy oil too, or running a very rich mix a few tanks and oil built up in the bottom of the CC. Then the saw was run near...
-
I've been using dollar store's Totally Awesome for $5/gal.
-
Check their ebay listings
-
Naw - those look like pretty average wear marks to me. Most two-cycle pistons will pick up wear lines or marks. Apart from the burnt oil...
-
Yes, there is more buildup than I'm used to seeing. I'm not a big-time builder. I know how to take things apart and put them back...
-
It’s possible that it got hot but that usually doesn’t happen if the saw sounds right and is 4 stroking out of the cut (unless it has a...
-
Is the color from running hot or rich?
-
That looks more like crappy oil. Carbon left from unburnt oil.
-
hacskaroly replied to the thread nm.That I don't know, I generally work on free or project saws and they usually come with issues. Looking at the carbon in the exhaust...
