hacskaroly's latest activity
-
hacskaroly reacted to Woodslasher's post in the thread MCCULLOCH The official McCulloch thread with
Haha.
I figured 3 years was verging on a bit too long to just lap a clutch 'n' snug it down. Bugger is the clutch nut rounded off when I was... -
Any of mine comes up with a minor issue that is easy to repair (oil pressure lines, A/V mounts) I buy another running saw ...
-
hacskaroly reacted to eric4's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
I'm still waiting on one in the mail. Fingers crossed it's the same style case. Working on another 462 m-tronic right now, and have... -
hacskaroly replied to the thread STIHL The Official Stihl Chainsaws Thread.I test my M-Tronic 261 by laying the spark plug on the cylinder and get spark that way (no issues). The M-Tronics have a specific...
-
-
hacskaroly reacted to FederalQ's post in the thread PAST 2025 Northern Wisconsin GTG September 20th with
Wow.
I was looking forward to attending a first ever GTG until this happened last week. I’m essentially useless! -
hacskaroly reacted to lehman live edge slab's post in the thread Stumped on Stihl BR450 Blower Stopping with Like.
Ethanol won’t hurt the br450 it’s designed for 89 octane and up to 10% ethanol. Long as it’s fresh gas and gets used fast enough won’t...
-
hacskaroly reacted to lehman live edge slab's post in the thread Stumped on Stihl BR450 Blower Stopping with Like.
I’d put a fuel line in it since you’ve already done the filter and tank vent. Also rebuild or have carb rebuilt with new primer bulb...
-
hacskaroly reacted to lehman live edge slab's post in the thread MCCULLOCH The official McCulloch thread with Like.
My 090 cut well also but realize they’re not as fast as a 125 Mac but not way behind either. Sold the 090 because it was just to rough...
-
hacskaroly reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
The CP125 is a pretty capable saw, that's Don Lane's (sawfun) saw with a 48" bar tackling a 48" diameter oak. Mark
-
-
-
Scott’s method works well, but I personally only use it on some Husky models that don’t have any type of stop in the case for bearing...
-
-