hacskaroly's latest activity
-
Bought this chunk of aluminum a week ago last Saturday but just picked it up the other day. Lowes wants $535 with the communist... -
Machines are being cleaned & emptied of mulling fluids, this one coworker pulls the tote containing fresh clean emulsion to his machine...
-
hacskaroly reacted to legdelimber's post in the thread The "I work with dumb people" thread with
Haha.
Cigarette butts, tobacco spit and the occasional styrofoam coffee cup with a 1/4" of creamer in it ("because it's fun to watch the hot... -
hacskaroly reacted to Freak007's post in the thread WANTED Stihl 026 air filter cover or 260 cover set with
Like.
Looking for the "new" style Stihl 026 filter cover; flat top with the oval knob, for use with the larger air filter and compensating... -
hacskaroly reacted to nv656's post in the thread SOLD MCCULLOCH sp125c engine block/cylinder with Like.
More
-
hacskaroly reacted to nv656's post in the thread SOLD MCCULLOCH sp125c engine block/cylinder with Like.
Used/damaged Sp125c engine block. Some plating defects by exhaust port. Looks to have had a rod issue at one point, talked to terry and...
-
Me and a friend.
-
Starts up OK, runs like a crazed woman at high speed, but when I put her down to go do something else, it dies immediately when it's...
-
Should be marked. Usually L closest to cylinder.
-
I would be concerned about an air leak. Sucking maverick air will make it run like crazy wide open but has a drastic affect on idle...
-
hacskaroly replied to the thread Stihl 021 Craps Out On Idle.Like EFSM stated, possible air leak, when it is warm/hot and at idle, it might be pulling more air past say the oil seals and then...
-
hacskaroly replied to the thread buying just 4-stroke carb bowl oring gasket.We had fuel caps walk off from saws at work. Hard to sell a brand new saw without a fuel or oil cap....
-
hacskaroly reacted to heimannm's post in the thread LRB Piston/rings for P40 P41 P42 and Farmsaw? with Like.
I have used a few LRB pistons, my experience has been mostly good. First one I received (70 cc McCulloch) did not have the ring grooves...
-
I mean, I think despite their chunkiness, they handle nicely. What in your opinion sets the standard for 50cc?
-
hacskaroly reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Yes and yes... I spent a little time on clean up today. At first I thought this might need to be a complete tear down as it was very...