hacskaroly's latest activity
-
I agree op would be better off with a inverter. Probably cost effective too. Would be worth checking out. -
My old lathe is set up similarly on a VFD. This new lathe has a two stage motor and a lot of controls wired for 3 phase, including an...
-
hacskaroly reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with
Like.
I have the AV mounts if you can't find them locally. White smoke normally indicates the automatic oil pump is not properly sealed and... -
Service Manual for a Stihl br700 and KM 131 R please?
-
hacskaroly reacted to NZsaws's post in the thread MCCULLOCH The official McCulloch thread with Like.
Yeah she's a bit rough but if can find new mounts should fix up ok. Starts fine,
-
hacskaroly reacted to NZsaws's post in the thread MCCULLOCH The official McCulloch thread with Like.
Picked up a 850 at $180 US looking worse for wear. Rubbers are worn and smokes like a train but has great compression and seems to oil...
-
hacskaroly replied to the thread MCCULLOCH The official McCulloch thread.Shoot, that one doesn't look too bad at all. Looks like it needs a little TLC, but otherwise it appears to be in great shape!!
-
My answer might not be correct, but when I re-wound the recoil on the @Squareground3691 2100CD, I'm pretty sure I used 36" of 4mm rope...
-
Ok gents…😠I keep ripping the pull cord out of the saw so a few questions. I also broke a bid d loop handle in half… 1. How should I be...
-
hacskaroly replied to the thread Husqvarna 2100 thread.Just to clarify, is the knot slipping (popping through the hole) or is it breaking? Generally I will put in a figure 8 knot and work it...
-
The gasoline is 89 ethanol free marine gas and a week old. 45:1 mix. Interesting, I never heard of the wasted spark system, even though...
-
Got the new ring installed. Wasn't quite as easy as I imagined, obviously the ring won't fit in the cylinder to measure since it's...
-
hacskaroly replied to the thread So what did you buy today.Congrats, I have read several great reviews about these machines, looks like you got a good one!
-
Picked this up at Auction this weekend. Anyone got a Rotary Phase Converter they want to sell cheap?
-
hacskaroly reacted to jorgemef's post in the thread New Stihl FS131 not starting cold after working 4 hours in previous day. with Like.
Exaclty the same I notice. Is just as my is handle bar version is akward how to do it(smidge trhothle while pulling cord). My kawasaky...