hacskaroly's latest activity
-
I just recently replaced the short block and piston (4180 020 1209) on my trimmer (nothing wrong with the old one, except that the valve... -
hacskaroly reacted to TheTreeTrekker's post in the thread Contract Climber in Colorado–Ready to Lend a Hand (or a Rope!) with
Like.
Hey fellow tree pros, I’m Zack, a contract climber out of Colorado, and I’m looking to connect with tree and landscape companies who... -
Flood the cylinder with mix and shake then dump out. Refresh fuel in tank and try to start it. If it starts let it run to get good and...
-
hacskaroly reacted to Stump Shot's post in the thread WANTED Husqvarna 2100 2101 501566501 & 501601401 with Like.
Looked through my 2100 stash and no throttle lever could be found amongst the peripheries. However, Husqvarna has a duck bill valve -...
-
hacskaroly reacted to nv656's post in the thread WANTED Husqvarna 2100 2101 501566501 & 501601401 with Like.
thanks!
-
Does it pull over like it should? If water didn’t get into the intake and exhaust you should be fine. By the looks of the chain it...
-
Yup, try and run it first id say
-
hacskaroly reacted to Vintage Engine Repairs's post in the thread So what did you do today? with Like.
088 rebuild complete. Edited down to get to the point...
-
hacskaroly replied to the thread WANTED Husqvarna 2100 2101 501566501 & 501601401.Adding an image from the IPL without all the little circles, highlighting the parts requested to make it easier to see.
-
-
hacskaroly reacted to nv656's post in the thread WANTED Husqvarna 2100 2101 501566501 & 501601401 with Like.
Looking for part numbers 501601401 lever and 501566501 valve Nos preferred, looking for multiple
-
hacskaroly replied to the thread HELP! Husqvarna 440.If you are concerned that water may have gotten into the cylinder, pull the plug and turn the saw upside down to see if any water comes...
-
My father recently received a Husqvarna 440. He gave it to me to work on. He said the guy he got it from left it in his flooded basement...
-
I never did cut trees full time. I was doing it as a small business for a few years, supplementing my income. But I work as a Production...
-
hacskaroly replied to the thread MCCULLOCH The official McCulloch thread.That is awesome to get that saw for $50!! Yes it is dirty, but should look good after a good cleaning! You probably already did this...
-
I finally managed to get my hands on an big mcculloch as I picked up this SP105 for less than $50 at an auction including the chainsaw...
